Superior Floor Coatings logoSuperior Floor Coatings
Who We Help
Contact

New Construction Floor Coatings
in Central Illinois

Builders, GCs, and owners building shops, pole barns, commercial buildings, and homes — we fit the coating into the build schedule so the slab starts life sealed and ready.

New Construction Floor Coatings

A new concrete slab is the best shot at a floor that lasts, and the window to get it right is during the build. Once the concrete is poured and cured, the surface is clean, open, and ready to bond — before fixtures, shelving, equipment, and foot traffic mark it up. Coating the slab at that point seals it, protects it from the rest of construction, and hands the owner a finished floor on move-in day instead of bare concrete that starts absorbing stains the moment the first tool drops.

New construction floor coatings are epoxy and resin systems scheduled into the build sequence. The key is timing — the slab has to be cured enough to coat, and the coating has to go down before the space fills up. Bring us in early, while the concrete is still being planned or poured, and we can talk through the slab, the mix, the cure, and the right point in the schedule to coat. A shop floor, a pole barn, a commercial building, a new home garage — each one has a different traffic plan and a different system, and the build sequence is where we match them.

We coordinate with the other trades on site. The coating goes down after the slab is ready and before the fixtures and equipment move in, and we work around the plumbers, the electricians, and the finish crews so the floor does not get coated too early or walked on too soon. For a builder or a general contractor, that coordination is the value — a floor that lands at the right point in the sequence, protected from construction traffic, and ready for the owner on day one. For the owner, it means moving into a finished floor instead of a slab that still has to be dealt with.

Request a quote

Tell us about your floor

Signs it's time

Why Coat a New Slab During the Build

The slab is clean and open

A new cured slab has no oil, no stains, no old coatings — the surface is open and ready to bond. That is the best possible starting point for a coating that lasts.

Construction traffic is coming

Trades, tools, and equipment roll across the slab for the rest of the build. Coating it first protects the concrete from staining and damage during construction.

The space is still empty

No shelving, no equipment, no fixtures to work around. The coating goes down fast and clean across an open floor, with nothing to mask or move.

The owner wants a finished floor

Hand the owner a sealed, finished floor on move-in day instead of bare concrete. The floor starts its life ready for service, not on the to-do list.

The schedule has a window

There is a point in every build — after the slab cures, before the space fills — where coating is fast and easy. We hit that window.

You're planning the slab now

Bring us in while the concrete is still being planned. We can talk through the mix, the finish, and the cure so the slab is ready for the coating you want.

How the job goes

How a New Construction Coating Fits the Build

1

Bring us in early

Call us while the slab is still being planned or poured. We talk through the concrete, the mix, the cure time, and the traffic the finished floor will carry.

2

Wait for the cure

A new slab has to cure before it can be coated. We schedule the coating for the right point after the concrete is ready — not too soon, not too late in the sequence.

3

Prep the new slab

Even a new slab gets prepped — we mechanically profile the surface and address any curing compounds or contaminants so the resin bonds to open concrete.

4

Base coat and flake or finish

The base coat goes down across the open floor, then the flake broadcast or the solid finish. With the space empty, this goes fast and clean.

5

Topcoat

A clear, durable topcoat seals the system and protects it from the rest of the construction traffic still to come.

6

Ready for move-in

The floor is sealed, finished, and protected — ready for the owner and the fixtures, equipment, and traffic that follow.

Options

Systems to Plan for a New Build

Flake vs. solid color

A flake system gives a decorative, textured finish that hides minor imperfections — common in garages, shops, and homes. A solid color is smooth and uniform — common in commercial and industrial spaces. We match it to the building.

Slip-resistant texture

Where the finished floor will see water or mixed foot and vehicle traffic, we can build a skid-resistant texture into the topcoat. We talk through where it's needed.

Epoxy cove base add-on

For new washdown spaces — kitchens, processing rooms, wash bays — plan the cove base in from the start so the floor-to-wall seam never exists.

Build for the traffic

A home garage, a shop floor, and a warehouse slab carry different loads. We specify the build thickness and resin hardness for the traffic the finished floor will actually see.

Why Superior Floor Coatings

Why Builders Bring Us In Before the Slab Cools

Superior Floor Coatings is based in Arthur, Illinois, and our focus is commercial and industrial floor coatings — shops, warehouses, plants and ag facilities that need a floor built for real traffic. We coat new construction and existing concrete, and we install epoxy resin cove base and wall coatings for spaces that need a seamless, washable surface.

We answer the phone Monday to Saturday, 6 AM to 9 PM. Call us at (217) 294-3979 and we'll walk you through it.

Questions

New Construction Floor Coatings FAQ

When in the build should the coating go down?+

After the slab is poured and cured, and before fixtures, shelving, and equipment move in. We schedule around your build sequence and the other trades so the coating lands at the right point.

How soon can you coat a new slab?+

A new concrete slab needs to cure before it can be coated. We'll schedule the coating for the right point after the concrete is ready. Call us at (217) 294-3979 and we'll walk you through the timing.

Do you coordinate with the other trades on site?+

Yes. We work around the plumbers, electricians, and finish crews so the floor goes down at the right point and does not get walked on too soon. We plan the sequence with the builder.

Can you coat a pole barn or shop floor?+

Yes. Pole barns, farm shops, and ag buildings are a big part of new construction work. We install systems that seal the slab and hold up to the equipment and chemicals the building will see.

Should we call you before the slab is poured?+

It helps. If we are in early we can talk through the concrete mix, the finish, and the cure so the slab is set up for the coating you want. But we can also coat a slab that is already down.

Do you work with general contractors and builders?+

Yes. We work with GCs and builders across Central Illinois, scheduling the coating into the build sequence and coordinating with the trades on site. Call us at (217) 294-3979 to talk through your project.

Service area

New Construction Floors From Arthur Across Central Illinois

Based in Arthur, IL, we serve homes, businesses and industrial facilities within about 50 miles. Larger commercial and industrial projects farther out: call to talk it through.

Building something new? Let's talk about the slab.

Bring us in early and we'll fit the coating into your build schedule. For builders, GCs, and owners across Central Illinois.