Superior Floor Coatings logoSuperior Floor Coatings
Who We Help
Contact

Garage Floor Coatings
in Arthur, IL

Decorative flake epoxy garage floors for homes and shops — sealed against oil, salt, and hot tires, and turned into a clean, finished space you actually want to use.

Garage Floor Coatings

A garage floor takes more abuse than almost any other floor in a home. Hot tires pull at the surface every time a car pulls in. Oil and coolant drip and soak into bare concrete. Road salt and snow-melt sit on it all winter. Foot traffic, dropped tools, and heavy storage wear it down. A bare slab absorbs all of that, stains dark, and turns into a dusty, rough surface that tracks grit into the house and never quite comes clean. A flake epoxy garage floor seals that slab and flips the whole space.

A garage floor coating is a resin system that bonds to properly prepared concrete and cures into a hard, sealed, continuous surface. The base coat locks to the slab, a decorative flake broadcast gives the floor color and texture and hides the small imperfections every slab carries, and a clear topcoat seals it all against scuffs, chemicals, and hot tires. The result is a floor that wipes clean, reads bright and finished under the lights, and turns a garage from a place you park into a space you use — a workshop, a home gym, a hobby room, or just a clean garage that does not embarrass you when the door is open.

The same flake system works in a shop garage, a pole barn, or any residential or light commercial space that wants a durable, decorative floor. We prep the concrete the right way — mechanically profiling the surface, repairing cracks and spalls, and removing old coatings or contaminants so the resin bonds permanently. Then we build the system up and leave you with a floor that holds up to the work a garage actually does.

Request a quote

Tell us about your floor

Signs it's time

When a Garage Floor Is Past Its Prime

Oil stains that won't come out

Drips and leaks have soaked into bare concrete and no cleaner brings it back. A sealed epoxy surface wipes clean instead of absorbing the next drip.

Salt and snow damage

Road salt and snow-melt sit on the slab all winter and break down the surface. A coated floor sheds the melt instead of letting it eat the concrete.

Hot tires are pulling the surface

Hot tires pull at bare concrete and at failing coatings, leaving marks and lifting the surface. A bonded epoxy system holds up to the heat and the pull.

The floor is dusty and rough

A bare slab dusts and sheds surface paste, leaving grit that tracks into the house. A sealed floor locks the surface down and stops the dust.

You want to use the garage for more

A workshop, a gym, a hobby space — a finished floor turns the garage into a usable room instead of a storage bay for a stained slab.

An old coating is peeling

Peeling garage paint and failing DIY coatings look worse than bare concrete. We remove what is there, prep the slab, and start clean with a bonded system.

How the job goes

How a Garage Floor Goes Down

1

Look at the floor and talk through the job

We look at the slab, the cracks, the stains, and how you use the garage. Then we recommend a flake or solid system and plan the schedule.

2

Prep the concrete

We mechanically grind the surface to open the pores, repair cracks and spalls, and remove old coatings or contaminants so the resin bonds permanently.

3

Base coat

The base coat goes down and bonds to the concrete, building the thickness that carries hot tires, dropped tools, and foot traffic.

4

Flake broadcast

We broadcast colored flake into the wet base coat for a decorative, textured finish with depth that hides the small imperfections in the slab.

5

Topcoat

A clear, durable topcoat seals the flake and the color underneath, adds the gloss or matte finish you want, and protects against scuffs and chemicals.

6

Back in use

After the cure window the floor is ready for foot traffic and vehicles — clean, sealed, and built to hold up to the work a garage does.

Options

Finish and Flake Choices for a Garage

Flake vs. solid color

A flake system broadcasts colored chips into the base coat for a textured, decorative floor with depth that hides minor imperfections — the popular choice for garages. A solid color coat is smooth and uniform. We help you pick the one that fits the space.

Slip-resistant texture

Where water, snow-melt, or foot and vehicle traffic mix — entries, the apron, walk-in doors — we can add a skid-resistant texture to the topcoat. We talk through where it's needed and where it isn't.

Flake blend and color

Flake blends come in a range of colorways, from neutral grays to warmer earth tones. We help you choose a blend that fits the garage and the rest of the home. The panel below shows a flake blend example.

Cove base add-on

For a garage that gets hosed out or sees a lot of washdown, a cove base sweeps the floor up the wall so there is no seam at the corner. We talk through whether it fits your space.

Why Superior Floor Coatings

Why Homeowners Trust Us With Their Garage Slab

Superior Floor Coatings is based in Arthur, Illinois, and our focus is commercial and industrial floor coatings — shops, warehouses, plants and ag facilities that need a floor built for real traffic. We coat new construction and existing concrete, and we install epoxy resin cove base and wall coatings for spaces that need a seamless, washable surface.

We answer the phone Monday to Saturday, 6 AM to 9 PM. Call us at (217) 294-3979 and we'll walk you through it.

Questions

Garage Floor Coatings FAQ

Will the coating hold up to hot tires?+

Yes. A properly bonded epoxy system holds up to hot tires, which is one of the main things a garage floor has to take. The bond comes from proper concrete prep — we mechanically profile the slab so the resin locks on.

Can you coat over an old garage floor coating?+

If the existing coating is sound and well bonded we can scarify and recoat. If it is peeling or failing we remove it down to bare concrete first. We assess every floor before we quote.

What about cracks in the slab?+

We repair cracks and spalls as part of preparation before coating. Hairline cracks are bridged by the resin; wider cracks are routed, filled, and sealed so they do not telegraph through the coating.

How do I clean a flake garage floor?+

A sealed flake floor has no pores and no grout lines, so a mop, a squeegee, or a shop vac finishes the job fast. Spills wipe up instead of soaking in. We talk through the cleaners that suit the topcoat.

Do you coat shop and pole barn floors too?+

Yes. The same flake and solid systems work in a shop garage, a pole barn, or any residential or light commercial space that wants a durable, decorative floor. We match the build to the traffic.

How far do you travel for garage work?+

We serve homes within about 50 miles of Arthur. Larger commercial and industrial projects farther out: call to talk it through. Call us at (217) 294-3979.

Service area

Garage Floors Near Arthur and Beyond

Based in Arthur, IL, we serve homes, businesses and industrial facilities within about 50 miles. Larger commercial and industrial projects farther out: call to talk it through.

Ready to turn the garage into a finished space?

Tell us about the slab and how you use the garage. We'll match a flake or solid system to the work it takes.