Superior Floor Coatings logoSuperior Floor Coatings
Who We Help
Contact

Industrial Floor Coatings
in Central Illinois

Heavy-duty resin coatings for warehouses, manufacturing and fabrication shops, ag equipment shops, and wash bays — built for forklifts, chemicals, and the loads a working floor takes.

Industrial Floor Coatings

An industrial floor takes a different kind of punishment than anything else in a building. Forklifts and pallet jacks roll across it all day. Heavy equipment sits on it, gets dragged across it, and leaks into it. Oils, solvents, fuels, and cleaning chemicals spill on it and soak in. Hot tires pull at the surface. A bare concrete slab absorbs all of it — stains deep, gets harder to clean every season, and eventually starts to dust and scale. An industrial floor coating seals that slab and gives it a surface built for the work.

Industrial floor coatings are resin systems engineered for load and exposure. The build thickness and the resin hardness get matched to the traffic the floor actually carries. A warehouse aisle that sees forklifts all day needs a harder, thicker system than a light-traffic storage room. A processing floor that gets hosed down every night needs a coating that tolerates moisture and chemical cleaning. A fabrication shop that cuts and grinds metal needs a surface that resists impact and hot sparks. We read the floor, talk through the chemicals and the loads, and specify the right system for the building.

Concrete prep is where an industrial coating earns its bond. Oil-saturated concrete has to be cleaned and profiled before anything will stick to it. We mechanically grind or shot-blast the surface to open the pores, repair cracks and spalls, and remove old coatings or contaminants. On a floor that has soaked up years of oil and fuel, that prep is the difference between a coating that lasts and one that peels in sheets. We do the prep right, then build the system up — base coat, finish, and a topcoat sealed against the chemicals and the wear.

Request a quote

Tell us about your floor

Signs it's time

When a Shop Floor Starts Holding You Back

Oil and grease soaked in

Years of drips and spills have turned the concrete dark and stained. A sealed coating stops the absorption and lets spills wipe up instead of soaking in.

Concrete is dusting and scaling

A bare slab under heavy traffic starts to dust and shed surface paste, leaving a fine powder and a rough, degraded floor. A coating locks the surface down.

Forklift traffic is wearing it out

Aisle traffic and turning loads wear bare concrete fast. A heavy-duty resin system built for the load protects the slab and stands up to the wheels.

Cleaning is a losing battle

Porous concrete grabs oil, fuel, and dirt and will not let go. A sealed surface cleans with a mop or a squeegee instead of a pressure washer and a prayer.

Chemicals are attacking the floor

Solvents, acids, alkalis, and cleaning chemicals break down bare concrete over time. We match a resin to the chemicals your facility uses.

You need to organize traffic

A bare floor gives you nothing. A coated floor can carry striping for aisles, walkways, loading zones, and pedestrian paths to keep a busy floor organized and safer.

How the job goes

How an Industrial Coating Goes Down

1

Read the floor and the load

We walk the facility, look at the traffic, the chemicals, the equipment, and the hours you run. Then we specify a system and a build thickness matched to what the floor has to carry.

2

Prep the concrete

We mechanically grind or shot-blast the surface, clean oil and contaminants, repair cracks and spalls, and remove old coatings so the resin bonds to clean, open concrete.

3

Base coat

The base coat bonds to the concrete and builds the thickness that carries the load. On an industrial floor this is the layer that takes the beating.

4

Finish or flake

For a working floor we apply a heavy-duty pigmented finish. Where grip matters we build in a skid-resistant texture. We talk through what the floor needs.

5

Topcoat and striping

A durable topcoat seals the system against chemicals and wear. Where it fits, we lay in safety striping for aisles, walkways, and zones.

6

Back in service

After the cure window the floor is ready for traffic and production — sealed, organized, and built for the loads it carries every day.

Options

Systems and Add-Ons to Discuss

Flake vs. solid color

A solid pigmented system is the standard for a working industrial floor — smooth, uniform, and easy to clean. A flake system adds texture and hides imperfections where the look matters. We talk through which fits.

Slip-resistant texture

Where water, oil, or foot and forklift traffic mix, a skid-resistant texture in the topcoat adds grip. We talk through the areas that need it and the areas that don't.

Epoxy cove base add-on

A cove base sweeps the floor up the wall for a seamless, washable surface — the right call in wash bays, food processing, and any area hosed down regularly.

Safety striping

Aisles, pedestrian paths, loading zones, and hazard areas can be striped into the coating to organize a busy floor. We plan the layout with you.

Why Superior Floor Coatings

Why Plants Trust Our Crew With Industrial Floors

Superior Floor Coatings is based in Arthur, Illinois, and our focus is commercial and industrial floor coatings — shops, warehouses, plants and ag facilities that need a floor built for real traffic. We coat new construction and existing concrete, and we install epoxy resin cove base and wall coatings for spaces that need a seamless, washable surface.

We answer the phone Monday to Saturday, 6 AM to 9 PM. Call us at (217) 294-3979 and we'll walk you through it.

Questions

Industrial Floor Coatings FAQ

Can an industrial coating handle forklift traffic?+

Yes. Our industrial-grade systems are built for forklift and heavy equipment traffic, with the build thickness and resin hardness matched to the load. A warehouse aisle that sees forklifts all day gets a harder, thicker system than a light-traffic area.

What about oil and chemical spills?+

We select the resin for the chemicals present in your facility — oils, solvents, fuels, and cleaning chemicals. The system seals the concrete so spills wipe up instead of soaking in. We talk through the exposure before we specify.

Can you work around our production schedule?+

Yes. We schedule coating work during shutdowns, off-hours, or weekends, and we phase larger projects so only part of the floor is out of service at a time. We plan the sequence with you so production keeps running.

Do you coat ag equipment shops and farm buildings?+

Yes. Farm shops, machinery sheds, and ag buildings see oil, fuel, fertilizer, and heavy equipment. We install systems that seal the concrete and hold up to that work.

Can you stripe aisles and walkways?+

Yes. We can lay safety striping into the coating for aisles, pedestrian paths, loading zones, and hazard areas. We plan the layout with you before the topcoat goes down.

How far do you travel for industrial work?+

We serve industrial facilities within about 50 miles of Arthur. Larger commercial and industrial projects farther out: call to talk it through. Call us at (217) 294-3979.

Service area

Industrial Coatings From Arthur to Decatur and Beyond

Based in Arthur, IL, we serve homes, businesses and industrial facilities within about 50 miles. Larger commercial and industrial projects farther out: call to talk it through.

Got a shop, warehouse, or plant floor that needs work?

Tell us what the floor sees — traffic, chemicals, equipment, hours. We'll match a system to the load.